Compatibility · Detectors and file formats

Which bat detectors work with BioSonic?

BioSonic is web software that identifies European bat species from your bat detector recordings with AI, so ecology teams can sort and check large surveys in the browser. It reads WAV and FLAC from full-spectrum bat detectors, uploaded as recorded, plus Anabat zero-crossing files, which are converted on upload. For Anabat Express .zca and batcorder .raw files, ask us first.

Works with WAV and FLAC from Song Meter, Echo Meter, AudioMoth, Batlogger, Pettersson, Anabat and Ultramic, plus Anabat .zc and .NN# zero-crossing files.

Last updated: 2026-11-17. Written by the BioSonic team.

File formats

What you can upload.

FormatAccepted?Notes
WAVYesFull spectrum, uploaded as recorded. Any file length.
FLACYesFull spectrum, uploaded as recorded.
Anabat zero-crossing .zcYesConverted on upload.
Anabat sequence files (.NN#, for example .03#)YesConverted on upload.
Anabat Express .zcaAsk us firstNot on the supported list yet. Send a sample first.
batcorder .rawAsk us firstOr export WAV from bcAdmin (Recordings > Save as Wave) and upload that.
Other formatsAsk us firstWrite to support@biosonic.se with a sample file.

The accuracy figures on our benchmarks page, including 98.7% F1 in the third-party benchmark by Wilder Sensing, were measured on full-spectrum recordings. No zero-crossing benchmark has been published, so test zero-crossing data on your own labelled files.

Detectors

Detectors and what to upload.

The GB per night figures are the mid-range estimates our storage calculator uses. Real volumes vary with bat activity, trigger settings, sample rate and night length.

DetectorWhat to uploadAbout GB per night
Wildlife Acoustics Song Meter SM4BAT FS and SM4WAV or FLAC, as recorded1.5
Wildlife Acoustics Song Meter Mini BatWAV or FLAC, as recorded1.0
Wildlife Acoustics Echo MeterWAV or FLAC, as recordedNot estimated
AudioMoth (Open Acoustic Devices); see the AudioMoth guideWAV, as recorded1.8 triggered; about 18 continuous at 250 kHz and 28 at 384 kHz over a ten-hour night
Elekon Batlogger (for example M2)WAV, as recorded0.8 (Batlogger M2)
Pettersson (for example D500X)WAV, as recorded2.5 (D500X)
Titley Anabat SwiftWAV (full spectrum) or sequence files (zero crossing); WAV gives the best results0.1 in zero-crossing mode
Titley Anabat Ranger, Chorus, Walkabout and Scout.wav (full spectrum) or .zc (zero crossing); full spectrum gives the best results1.5 (Chorus)
Titley Anabat Express.zca: ask us first0.05
Dodotronic UltramicWAV, as recordedNot estimated
ecoObs batcorder.raw: ask us first, or export WAV from bcAdminNot estimated

Using a detector that is not listed? If it writes full-spectrum WAV or FLAC files, upload a sample night and check the results. If it only writes another format, ask us first.

Good practice

Get the best results from your files.

  • Record full spectrum where you can. It keeps the most information about each call and is what the published benchmark measured. Titley notes that full spectrum can be converted to zero crossing, but not the other way round.
  • Upload files as recorded. No conversion or preprocessing is needed, and long files do not need cutting.
  • Mix detectors freely. One project can hold files from several detector brands, and every file is sorted the same way.
  • Expect several species per file. BioSonic detects up to 7 species per recording and separates feeding buzzes from social calls.
  • Try one sample night first. Before you move a whole project, upload one night and compare the results with your current workflow.

FAQ

Questions about detectors and files.

Which file formats does BioSonic accept?

WAV and FLAC from full-spectrum bat detectors, uploaded as recorded, plus Anabat zero-crossing files (.zc and .NN# sequence files such as .03#), which are converted on upload.

Does BioSonic work with my Song Meter, AudioMoth or Batlogger?

Yes. Upload WAV or FLAC files from Wildlife Acoustics Song Meter (including the SM4) and Echo Meter, AudioMoth, Elekon Batlogger, Pettersson, Titley Anabat and Dodotronic Ultramic directly, with no conversion.

Can I upload Anabat zero-crossing files?

Yes. BioSonic accepts .zc and Anabat sequence files such as .03# and converts them on upload. The 98.7% F1 benchmark was measured on full-spectrum recordings and no zero-crossing benchmark has been published, so record full spectrum where you can.

What about Anabat Express .zca files?

Ask us first. .zca is not on the list of supported uploads yet, so send us a sample before you move a whole project.

Can BioSonic read batcorder .raw files?

Ask us first. The simplest route today is to export WAV from bcAdmin with Recordings > Save as Wave and upload those WAV files like any other.

Do I need to cut long recordings into short files?

No. BioSonic accepts any file length, so long continuous files from AudioMoth or other detectors can go in as they are.

Can one project mix detectors?

Yes. You can upload files from different detector brands to the same project, and every file is sorted the same way.

Sources

Where these facts come from.

Facts about BioSonic come from pages on this site. Facts about other tools come from our comparison pages, which cite each publisher.

  1. Supported formats and detector brands: FAQ and product page.
  2. Titley detector modes (.wav, .zc, .zca, sequence files): BioSonic vs Anabat Insight, citing Titley Scientific.
  3. batcorder .raw and the bcAdmin WAV export: BioSonic vs ecoObs batIdent and bcAdmin, citing the bcAdmin 4 manual.
  4. GB per night estimates and AudioMoth continuous volumes: storage calculator.
  5. Benchmark measured on full-spectrum recordings: benchmarks page.

Last verified: 2026-11-17.

Try it on your own recordings.

Upload one sample night from your detector and see the results in the browser. Nothing to install.

support@biosonic.se · +46 72 744 65 85